LED Emitter for Double Burner Lamps, Matronics

Compact 24V emitter for Doubler Burner lamps, available in bi-colour and single colour. This allows you to create combinations of colours and functions, such as white position light on both sides, and also US indicator light on one side.

The emitters have a built-in separator to give the same "dual burner" look as the original lamp has, where the newer dual burner with built-in LEDs does not have the same retro look.

They are easy to install, as the emitter replaces the original bulb holder, which is easily removed. The emitters are attached through the original holes in the rubber base, the emitters are connected, and the glass is screwed back on. Only an M4 nut and M4x10 bolt are included to attach the glass to the emitter.

Wiring and cabling

Due to the shape of the emitter, you should use 90-degree cable lugs, which we sell separately, or a double wiring harness to connect two emitters at once. You can use standard cable lugs, but these will be very visible.

Color change

The emitter changes color when you swap the plus and minus. This can be done with a switch, a two-pole relay, or one of our two-color controllers.

The simplest is the Colorchanger controller , which changes color upon a signal.

We also have a Dual Color US light controller , if you want to use the lights as both position lights and indicators.

The latest solution is a Dual Color front and rear light controller , which has both high/low light and flashing functions.

Price for 1 piece.